Regional Sales Manager
The Pratt & Whitney Canada Customer Service Center Europe GmbH (CSC) is an aerospace Joint Venture Company between Pratt & Whitney Canada and MTU Maintenance Berlin-Brandenburg GmbH providing sales and customer services to operators of P&WC products within Europe, Africa and the Middle East. ...
Job Role: Sales & Marketing | Job Hours: Full-Time | Location: Germany | Job Position: Permanent | Company: Pratt & Whitney Canada | Published Date: 02 December 2008 10:52:49
Air Traffic Controller (m/f) - Germany - Aviation
DFS Deutsche Flugsicherung GmbH is responsible for air traffic control in Germany. As a company organised under private law,
DFS is 100% owned by the Federal Republic of Germany. Our air traffic controllers handle three million aircraft movements every year.
DFS als ...
Job Role: Air Traffic Controller | Job Hours: Full-Time | Location: Germany | Job Position: Permanent | Company: DFS Deutsche Flugsicherung GmbH | Published Date: 02 December 2008 09:32:09
VIP Aircraft Broker required for an established corporate jet operator.
The company has an expanding fleet of short, medium and long haul jets based in Germany.
The position requires an experienced Broker that has an excellent track record of sales in the VIP and charter jet market.
The successful candidate must ...
Job Role: Managerial and Executive | Job Hours: Full-Time | Location: Germany | Job Position: Permanent | Salary: £Excellent plus benefits | Company: Zenon Aviation | Published Date: 28 November 2008 17:05:50
For an Airbus Project to be carried out in Hamburg we are looking for a Senior System Integratio Designer A380.
Tasks:
-Preparation of specifications
-Preparation of manufacturing orders
-Preparation of predesigns in co-operation with suppliers
-Supplier supervision
-Preparation of schedules and cost plans
-Supplie ...
Job Role: Manufacturing | Job Hours: Full-Time | Location: Germany | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:59:00
For an Airbus Project to be carried out in Bremen we are looking for Design support for stress concessions.
Tasks:
-Design support for stress concessions (Metal, composite)
-Concessions analysis and solution finding together with manufacturing
-Use of SAP and other Airbus tools
Education:
-Graduated in Mechanical/G ...
Job Role: Manufacturing | Job Hours: Full-Time | Location: Germany | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:58:11
For an Airbus Project to be carried out in Bremen we are looking for a Stress A400M "Structural Mechanics Cargo Compartment".
Tasks:
-Processing A400M Cargo Handling System (CHS)/ Aerial Delivery System (ADS) and other cargo component design
-Processing of all relevant stress specifications, implementation of insta ...
Job Role: Stress Engineer | Job Hours: Full-Time | Location: Germany | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:57:44
For an Airbus Project to be carried out in Hamburg we are looking for a Stress Engineer CoE VT.
Tasks:
-Predimensioning, dimensioning and approval of all primary structures components (CoE VTP)
-Design support
-Manufacturing support regarding processing of concessions, modifica-tions and customer requirements
-Str ...
Job Role: Stress Engineer | Job Hours: Full-Time | Location: Germany | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:57:06
For an Airbus Project to be carried out in Hamburg we are looking for a Product Structure Coordinator.
Tasks:
-Conception, implementation and support of methods and processes in CoE
-Releaese of methods and processes
-Securing compliance of all relevant product structure methods and processes in engineering
-Devel ...
Job Role: Aerospace | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:56:37
For an Airbus Project to be carried out in Hamburg we are looking for a Systems Engineer - Specialist Electronic Components & Lightning.
Tasks:
-Check of electromagnetic compatibility (lightning protection) of new systems
-Monitoring of electronical development, tracking and enforcement of lightning protection and ...
Job Role: Systems Engineer | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:56:08
For an Airbus Project to be carried out in Hamburg we are looking for a Systems Engineer.
Tasks:
-Systems Engineer for satellite and communication systems
-Responsible for Airline Network Architecture especially for system definition, development, Integration, verification, validation, approval and Support of sate ...
Job Role: Systems Engineer | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:55:40
For an Airbus Project to be carried out in Hamburg we are looking for a Design Engineer Seats.
Tasks:
-Development of passenger and flight attendant seats together with SFE/BFE seats manufacturers in A350, A380, Long Range and Single Aisle Airbus-Programs
-Implementation of development processes together with seat ...
Job Role: Flight Attendant | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:55:26
For an Airbus Project to be carried out in Hamburg we are looking for a Stress Engineer.
Tasks:
-Securing compliance with design specifications for the integration / installation of SFE/BFE cabin equipment parts, check and approval of required documentations for Long Range programm
-Preparation of required stress ...
Job Role: Stress Engineer | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:55:06
For an Airbus Project to be carried out in Hamburg we are looking for a Consumer Research Specialist.
Tasks:
-Market research concepts for product development validation (A380, A30x, A350 and cross program)
-Content harmonisation with internal and external interfaces
-Implementation of studies and analysis, evalua ...
Job Role: Aerospace | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:54:23
For an Airbus Project to be carried out in Hamburg we are looking for a Subcontracting Manager.
Tasks:
-Internal monitoring of processes and their progress, and also degree of Supplier performances and in cases of deviation getting active according to Risk analysis
-Review of projects regarding the improvement of ...
Job Role: Aerospace | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:53:52
For an Airbus Project to be carried out in Hamburg we are looking for Support Management CoE Fuselage & Cabin SA.
Tasks:
-Support of SA (Single Aisle) Business Team, improvement team and performance management in the SA Program Management for CoE Fuselage & Cabin
-Data management of existing KPIs (Key Performance ...
Job Role: Program Management | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:51:55
For an Airbus Project to be carried out in Bremen, Hamburg or Manching we are looking for a Stress Engineer Composite Structure and Metalic Pipes.
Tasks:
Within an international und multi-disciplinary engineering team he/she is a focal point and the stress approval authority for all stress relevant items within th ...
Job Role: Stress Engineer | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 28 November 2008 16:48:55
For an big aircraft project to be carried out in Southern Germany we are looking for a Mechanical Design Engineer (Interior).
Tasks:
-Development and Design of aircraft interior for aircraft type Do328. -Investigations of certifications aspects. Integration of passenger comfort and safety system.
-Supporting sales ...
Job Role: Mechanical Design Engineer | Job Hours: Full-Time | Location: Germany | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 27 November 2008 17:01:00
For a long term helicopter project to be carried out in Southern Germany we are looking for an experienced Design Engineer with CATIA V4 knowledge.
Tasks:
International design-technical support and technical assistance of NH90 and Tiger production, particularly the worldwide final-assembly lines, concerning elect ...
Job Role: Assembly | Job Hours: Full-Time | Location: Germany | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 27 November 2008 17:00:53
For an Airbus Project to be carried out in Bremen we are looking for a Design Engineer, ATA 21 - Air condition.
Tasks:
-Implementation of studies and analysis in the area of air conditioning
-Preparation of pre-design and testing of assembly drawings for ATA21 (air condition) in A380 program
-Processing of monitori ...
Job Role: Assembly | Job Hours: Full-Time | Location: Germany | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 27 November 2008 17:00:48
For an Airbus Project to be carried out in Hamburg we are looking for a Design specialist SDW structures design.
Tasks:
-Development, design and support of complex structures assemblies (A330-200F GMF)
-Shells/Assemblies Section 13/14: development & design of complex structures assemblies and harmonisa-tion with o ...
Job Role: Assembly | Job Hours: Full-Time | Location: Hamburg | Job Position: Contract | Company: Garner Cad Technic (GCT) | Published Date: 27 November 2008 17:00:42