credit NASA tv / caption: the hydrogen vent line connects to the external tank for space shuttle Discovery
NASA has set the launch date for space shuttle Discovery's mission STS-119 as no earlier than this Sunday but only what NASA engineers call "wiggle room" in a 30h retorque requirement process holds any hope of lift-off on the 15 March, with a Monday 16 March launch more likely
NASA's "rough cut" plan for solving the vent line issue is as follows
Proposed Troubleshooting plan:
- 24 hrs to inert tank
- Get access
- Look for gross misalignment of QD [quick disconnect]
- Perform decay check
- Remove QD and inspect flight seal
- Recovery - install new flight seal
- Decay check
- Reconnect vent line
- Proceed with checkout and would reconvene if issues.
It is the reinstallation of the seal and the related retorque requirement that some NASA engineers think could have some wiggle room to bring the launch forward to Sunday but that assumes that it works and so the likely outcome is a Monday launch attempt
The vent line issue is not new and the Shuttle programme has a standard approach to solve it, but this time it wasn't working leading to the launch scrub, according to a Mission Management Team memo provided to Hyperbola
Standard operating procedure is to start cycling the vent valve as an effort to clear any contaminants or ice build up. This has worked in the past, but this time we were outside of our experience and with progressive opening and closing of the vent valve, the leak was getting worse.