Top News on c919

  • PICTURE: Comac starts tests on C919 iron bird rig


    Chinese airframer Comac has started tests on the C919 iron bird ground rig.


  • Other News for c919

  • PICTURE: Comac on verge of starting C919 final assembly


    Comac is expecting to start final assembly of its first C919 flight test aircraft at the end of the month.


  • PICTURE: Comac gears up on C919 iron bird work


    Comac has installed over 90% of the necessary structures and systems on the C919 iron bird test rig, as it works...


  • C919 advances with mid-fuselage completion


    ​AVIC Xian Aircraft Industry has rolled out the mid fuselage of the first Comac C919, as the airframer works...


  • News Listings for c919

  • CFM relaxed about delay to Leap flight tests

    News | 11 Sep 2014 14:35 | Murdo Morrison

    ​CFM says a delay in launching flight tests of the first two Leap variants will not stymie certification plans for the narrowbody engine.http://www.flightglobal.com/news/articles/CFM-relaxed-about-delay-to-Leap-flight-tests-403597/
  • Comac, Bombardier drop plans for common cockpit

    News | 08 Sep 2014 07:20 | Mavis Toh

    Comac and Bombardier have dropped plans to pursue cockpit commonality in the C919 and CSeries, after detailed study found too many differences between the types.http://www.flightglobal.com/news/articles/Comac-Bombardier-drop-plans-for-common-cockpit-403425/
  • Comac embarks on weight reduction drive for C919

    News | 08 Sep 2014 03:13 | Mavis Toh

    Comac has embarked on a weight reduction exercise for its in-development C919 narrowbody programme.http://www.flightglobal.com/news/articles/Comac-embarks-on-weight-reduction-drive-for-C919-403422/
  • PICTURE: Comac on verge of starting C919 final assembly

    News | 02 Sep 2014 02:01 | Mavis Toh

    Comac is expecting to start final assembly of its first C919 flight test aircraft at the end of the month.http://www.flightglobal.com/news/articles/PICTURE-Comac-on-verge-of-starting-C919-final-assembly-403224/
  • PICTURE: Comac gears up on C919 iron bird work

    News | 02 Sep 2014 01:58 | Mavis Toh

    Comac has installed over 90% of the necessary structures and systems on the C919 iron bird test rig, as it works towards an end-2015 first flight target for its narrowbody programme.http://www.flightglobal.com/news/articles/PICTURE-Comac-gears-up-on-C919-iron-bird-work-403223/
  • C919 advances with mid-fuselage completion

    News | 28 Aug 2014 02:13 | Mavis Toh

    ​AVIC Xian Aircraft Industry has rolled out the mid fuselage of the first Comac C919, as the airframer works towards starting final assembly of the narrowbody by end 2014.http://www.flightglobal.com/news/articles/C919-advances-with-mid-fuselage-completion-403086/