FlightGlobal.com
Home
Premium
Archive
Video
Images
Forum
Blogs
Jobs
Shop
RSS
Email Newsletters
You are in:
Home
Aviation History
2003
2003 - 0356.PDF
Qatar Airways is one of the Gulf's youngest airlines. Based in Doha we fly to 36 destinations in Europe, The Middle East, Far East & Asia with our modern fleet of Airbus A330, A300-600 and A320 aircraft. Due to our continued expansion we are looking to fill the following positions to be based in Doha. Quality Assurance Manager (Ref: MQA/01/03) Responsible for the complete co-ordination of the Technical Department activities in relation to aircraft safety, reliability, quality assurance and airworthiness. To ensure adherence to Company's Maintenance Organisation Exposition. To establish and implement independent Quality Systems and Programmes and monitor compliance to Qatar DCAM requirements. Candidates with a technical/aeronautical engineering qualification and licensed in either A&C or Electrical/Multi-X/Radio with experience on the following aircraft types: A340, A320, A310/A300-600 and A330. Must have at least 15 years relevant experience in aircraft maintenance and quality assurance, of which at least 5 years should have been in a management position. Candidates should posses a sound understanding of JAR/FAR 145 regulations, JAR-OPS 1 and ISO 9000 requirements. Must be experienced in ICAO requirements relating to registration, importation and export of aircraft and engines and sound knowledge of technical records regulatory requirements. Applicants should be computer literate with excellent knowledge of Windows 95/98 applications ana must have strong technical report writing skills. Should have strong but flexible personality and have the ability to deal with multi national work force. Defect Control Engineer (Ref: DCE/02/03) The successful Candidate will be a senior engineer with a wide knowledge of defect investigation and rectification, responsible for day to day management and investigation of defects to ensure the maintenance status of the Qatar Airways fleet of A300-600, A319/A320 and A330 aircraft meets company and regulatory requirements. The task will involve monitoring, investigating and managing defects and their rectification. Liaison with other internal departments and external suppliers including manufacturers and vendors. Providing direction to Maintenance to ensure optimum operational reliability with due attention to safety and airworthiness. Computer literacy is essential together with an investigative attitude. Research of systems and their reliability, and providing appropriate recommendations by means of interface with internal departments, manufacturers and suppliers will be required. Candidates should be engineers with at least 10 years line maintenance defect investigation experience in a supervisory or higher position and with authorisation on at least one of the aircraft types operated by Qatar Airways. Knowledge of reliability monitoring and analysis procedures will be required. Maintenance Control Engineer (Ref: MCE/03/03) The successful candidate will be a senior engineer with a wide knowledge of line maintenance activities, responsible for day to day maintenance status of the Qatar Airways fleet of A300-600, A319/A320 and A330 aircraft. The task will involve management of planning of line maintenance activities. Liaison with other deportments and external suppliers including manufacturers. Providing direction to Line Maintenance and external maintenance suppliers to ensure operational reliability with due attention to safety and airworthiness. Computer literacy is essential. Candidates should be engineers with at least 10 years line maintenance experience in a supervisory or higher position and with authorisation on at least one of the aircraft types operated by Qatar Airways. Knowledge of Flight Operational procedures will be required. Licensed Engineers (Avionics) (Ref: LE/04/03) Licensed Engineers (Engine Airframe) (Ref: LE/05/03) Candidates will have successfully completed an internationally recognized training and hold ICAO type II license, with a minimum of 5 years experience as an AIRBUS A330/A300-600/A320 Licensed Engineer in a Line and/or Base maintenance environment. Development Engineer • Systems (Ref: DES 06 03) The successful candidate will be responsible for managing the relevant airframe and/or its mechanical systems on Qatar Airways fleet of A300-600, A320 and A330 aircraft. The task will involve evaluation of manufacturers recommendations and regulatory requirements to meet operational demands, and achieving required technical standards with effective cost control. Computer literacy is essential. Investigation of systems and their reliability, and providing appropriate recommendations by means of interface with internal departments, manufacturers and suppliers will be required. The Human Resources Department Qatar Airways, P.O. Box 22550 Doha, State of Qatar Fax: (974) 4622895 email: recruitment@qatarairways.com.qa Only short listed candidates will be contacted Development Engineer - Power Plants (Ref: DEP/07/03) The successful candidate will be responsible for managing the engines APU's installed in the Qatar Airways fleet of A300-600, A320 and A330 aircraft. The task will involve evaluation of manufacturers recommendations and regulatory requirements to meet operational demands, and achieving required technical standards with effective cost control. Computer literacy is essential. Engine condition monitoring, work-scope preparation, reliability investigation and interface with manufacturers and suppliers will be required. We are seeking engineers with extensive knowledge and experience of airframes and mainly their mechanical systems and propulsion units with at least 8 years of relevant Development and/or acceptable Maintenance experience. Candidates will posses either an acceptable Degree in a relevant discipline and/or hold an acceptable ICAO type II licence in the appropriate category. Practical experience in the area of airframes and systems maintenance and/or power plants especially on those aircraft operated by Qatar Airways will be a distinct advantage. Quality Assurance Engineer (Ref: QAE/08/03) To ensure that an air worthy, reliable and quality product is provided by applying constant maintenance standards and adherence to the Company's Maintenance Organisation Exposition. To survey base departments, line stations and aircraft, investigate incidents and defects, assess authorisation applications and conduct associated examination. Produce instructions and notices, determine solutions to operational problem and provision of advice to improve the quality and economics of aircraft and component maintenance. To liase with airworthiness authorities to ensure Company's product and performance meet acceptable standards. Candidates with a technical/aeronautical engineering with Airframe & Engine ICAO Type II Maintenance Licence covering at least two of the following aircraft types: A300-600 (PW4000), A320 (IAE V2500-A5), A330 (GE CF6-80C2). Must have at least 15 years related experience in line or base maintenance of which at least 5 years should have been in a Quality Assurance environment. Candidates must posses a sound understanding of JAR 145 regulations, JAR- OPS-1 sub part M requirements. Candidates should have extensive experience in carrying out defect investigations/conducting, Authorisation Boards and carrying out Quality Audits to JAR 145 requirements. Should be computer literate and must have strong technical report writing skills. Production Planning Engineer (Ref: PPE/09/03) Responsible for the production and distribution of aircraft maintenance plans/task cards ana ensuring that the associated inspections, repairs, overhauls and modification documentation is produced to the required standards and in a timely cost effective manner. The tasks will involve preparation of work packages, materials pre-load lists and schedule maintenance work packs for the Airbus fleet along with the preparation/publication of short and long term forecasts for airframe, engine ana component maintenance. Candidates must have an acceptable degree or equivalent in aeronautical/mechanical engineering together with a minimum of ten years' experience in airline Production Planning environment. Alternatively candidates with a Type II ICAO licence with extensive experience will be considered. A good knowledge of aircraft systems/Engine Manufacture Planning documents MSG-2 and MSG-3 processes, ability to extract/compile data and analyse maintenance cost, must be computer literate with sound knowledge of Windows 95/98, MS Office and must be able to negotiate maintenance agreements and communicate effectively at all levels. The positions carry competitive salary and benefits associated with the industry plus excellent career opportunities. The State of Qatar has no income tax. Please send immediately your CV with a covering letter quoting above reference number, giving full details of your career development to-date. In case we require you to be interviewed in Doha can you please send a recent passport sized photograph, photocopy of your valid passport to: QATAR AIRWAYS d_ij I—> 411 Taking you more personalty www.fliqhtinternational.com FLIGHT INTERNATIONAL 11-17 FEBRUARY 2003 65
Sign up to
Flight Digital Magazine
Flight Print Magazine
Airline Business Magazine
E-newsletters
RSS
Events
