All Programmes news – Page 193
-
NewsFirst Qatar A350 carries out maiden flight
Qatar Airways’ first Airbus A350-900 has taken off from Toulouse, marking the maiden flight of a serial production A350 airframe.
-
NewsQatar narrows A350-900 delivery window
Qatar Airways is preparing to take delivery of the first Airbus A350-900 from 8-10 December, says chief executive Akbar Al Baker.
-
NewsPICTURE: Rolls-Royce test-flies composite blade
Rolls-Royce has flown, for the first time, the composite blades to be used in its future UltraFan and Advance engine programmes.
-
NewsFirst Qatar A350 prepares for maiden flight
Qatar Airways’ first Airbus A350 could make its maiden flight as early as today, following certification of the type at the end of September.
-
NewsSikorsky, Boeing finalise design of SB-1 Defiant
Sikorsky and Boeing have finalised the design of the team’s offering for the US Army’s joint multi-role technology demonstrator (JMR-TD), called the SB-1 Defiant.
-
NewsLockheed brings Infirno to surveillance market
Lockheed Martin has decided to enter the turreted surveillance payload market, unveiling the 15in (38.1cm)-diameter Infirno system for forward looking infrared and electro-optical imaging.
-
News
Boeing starts building parts for first 737 Max
Having delivered 8,224 737s of all variants from 1967 through September, Boeing’s workers are now starting to build the single-aisle's newest model launched in 2011 – the 737 Max.
-
NewsPICTURE: VietJet's first A320 on order enters final assembly
The first Airbus A320 aircraft included under VietJet Air’s order for up to 100 examples of the narrowbody type has entered final assembly in Tolouse.
-
NewsComac to take delivery of first C919 nose
The nose section for the first C919 prototype is expected to be delivered to Comac's final assembly centre on 15 October.
-
News
Airbus confirms intent to complete A330s in Tianjin
Airbus has confirmed tentative plans to establish an A330 completion centre in Tianjin, where the airframer already has an A320 final assembly line.
-
NewsMaiden Leap-1C flight lasted nearly 3h
CFM International has confirmed the maiden test flight of its Leap engine family, beginning with a configuration to be used exclusively by the Leap-1C on the Comac C919.
-
NewsCFM starts test flights with C919's Leap-1C: source
Test flights have commenced with the CFM International Leap-1C powerplant, according to a source familiar with the effort.
-
News
FL Technics to operate hangar at Soekarno-Hatta
FL Technics has won a tender to rent and operate an aircraft maintenance hangar at Indonesia’s Soekarno-Hatta International Airport.
-
AnalysisANALYSIS: The ARJ21 progress report
Comac appears to be on the verge of finally getting its much delayed ARJ21 regional jet certificated, after having completed all the necessary ground tests and 95% of all flight test modules.
-
AnalysisANALYSIS: CSeries gains traction with lessors
Bombardier's confirmation of a CSeries order from Macquarie is another step in validating the programme with the aircraft leasing community.
-
News
Airbus to drop A350 ni-cad battery once lithium certified
Airbus will no longer offer the nickel-cadmium battery for the A350 once the lithium battery version receives certification.
-
NewsBoeing raises 737 yearly delivery target to 624 in 2018
Boeing has announced a plan to further increase 737 production to 52 aircraft per month, or 624 aircraft per year, in 2018.
-
NewsLessor deals a longer-term goal for MRJ team
Mitsubishi Aircraft is not immediately expecting an MRJ order from the leasing community, despite the regional jet type having amassed 191 firm orders plus 184 option or purchase-right commitments.
-
AnalysisANALYSIS: A look into Comac and its C919 ambition
Chinese airframer Comac has certainly been keeping busy.
-
News
Hexcel to build new composites plant for Airbus and CFM contracts
Carbonfibre materials specialist Hexcel is to cement its relationship with Airbus via a $250 million investment in production and quality control facilities at Roussillon in France.