Advertising

​PICTURES: C919 undergoes ultimate wing load test

The Comac C919 programme is making progress, with the aircraft passing a key static testing milestone and flight test aircraft 102 making a cross country flight.

On 12 July, top Comac executives witnessed the bending of static test aircraft 10001’s wings by nearly three metres for three seconds, simulating a 2.5g manoeuvre, and an ultimate wing load of 150%, says Comac.

Asset Image

All images Comac

The company says the performance of the wing met expectations and validates the aircraft’s design.

It adds that the test reflected the ultimate load the wing is likely to bear just short of sustaining damage, and that it is likely to be nonrepeatable. Another test examines the aircraft’s limit load, which reflects the maximum expected load.

Asset Image

In addition, flight test aircraft 102 conducted a 1h 46min sortie from Shanghai to Dongying Shengli airport, the first’s long-distance transition flight. There it joined aircraft 101.

“This means that the C919 has entered a new stage of intensive research & development flight testing, officially launching a multi-site synchronous flight test mode,” says Comac. “This will allow for testing in various complex meteorological conditions, and a series of high-risk test flight subjects in the future.”

Asset Image

Initially the aircraft will undergo ground tests for systems such as its CFM Leap-1C engines, fuel system, power supply, and environmental control system.

All told, Comac’s flight test programme will use six aircraft for flight tests, and two for static tests.

Related Content
Advertising
Advertising