All Engines articles – Page 161
-
NewsWider slides key to raising A320 seat-count
Airbus will use wider evacuation slides to secure approval for higher exit limits on its A320neo, as it plans to offer a 189-seat layout for the twin-engined jet.
-
NewsAirbus braced for A350 ramp-up as MSN5 nears flight
Airbus is expecting to fly its final flight-test A350 by the end of the month as it prepares for production ramp-up, with the final assembly line already handling aircraft up to MSN10.
-
News
Airbus expects sales breakthrough for A380
Airbus executives expect the A380 to make a significant sales breakthrough in the next few years as a result of passenger pressure, and have reiterated that a re-engined variant, called for by largest customer Emirates, is under consideration.
-
NewsAirbus bides time over A330neo decision
Airbus executives have dampened expectations of an A330neo launch at July’s Farnborough air show, stressing the airframer does not want to “rush into a decision”.
-
NewsBoeing preserves Japanese supplier content on 777X
Boeing has signed a preliminary agreement with a consortium of five Japanese suppliers to “provide” about 21% of the major structural components of the 777X.
-
NewsAirbus shows off A350 after a year of testing
Airbus has introduced the A350-900 to travellers outside of the company with a special media flight to coincide with a briefing on the programme at Toulouse.
-
NewsA330neo decision might not come before Farnborough
Airbus might not be in a position to reach a decision on proceeding with a re-engined A330 by the time of the Farnborough air show.
-
NewsEmirates A350 cancellation cuts Trent XWB backlog by £2.6 billion
Rolls-Royce says Emirates’ cancellation of orders for 70 A350s will cut its backlog for the Trent XWB will reduce its backlog by about 3.5%, but it is hopeful the slots will be taken up by other carriers.
-
News
Boeing seeks FAA waivers to deliver first 787-9 in June
Boeing needs a last-minute regulatory intervention to avoid a delay of the entry-into-service date later this month for the 787-9.
-
NewsCSeries restarts engines, but rules out Farnborough debut
Bombardier has restarted engine ground runs for the CSeries test fleet 13 days after an uncontained engine failure, and reaffirmed entry-into-service is set for the second half of next year.
-
NewsBoeing tweaks 777X wingspan, preserves folded length
Boeing has slightly increased the in-flight wingspan and the length of the wing-fold on the 777X.
-
NewsThree F-35B Lightning IIs to fly at RIAT 2014
More than 150 military and civil aircraft from all over the world are confirmed as participants in the 2014 Royal International Air Tattoo at RAF Fairford, UK, the stars of the show being three Lockheed Martin F-35B Lightning IIs.
-
NewsLiebherr to test electric-powered air pack for next-generation narrowbody
Liebherr will soon use a demonstration aircraft to test a power-generation system capable of replacing bleed-air-driven systems in the air-conditioning units of narrowbodies.
-
News
Russian firms developing Superjet electric-taxi drive
Russian aerospace firms United Aircraft and Aviation Equipment are jointly developing an electric-drive system for the Sukhoi Superjet 100, designed to reduce fuel-burn while taxiing.
-
AnalysisANALYSIS: New ATR chief to focus on legal framework
The appointment of the Airbus’s head of contract negotiations, Patrick de Castelbajac, as ATR’s new chief executive comes as the Franco-Italian manufacturer works to transform its legal status from “groupement d’intérêt économique” (GIE) to “société anonyme” (SA) to pursue new objectives: managing suppliers, and launching a new turboprop.
-
NewsIATA: CSeries engine incident will not derail service entry
Bombardier is confident last week’s engine-related incident with one of the CSeries test aircraft will not derail its plan to see the regional airliner entering service as scheduled in the second half of 2015.
-
AnalysisANALYSIS: What is the future for 3D printing in aerospace?
Making parts for a jet engine using a 3D printer is – despite what you may hear –– not cheap. The powder used by the printer to build up the part – layer by microscopic layer – is expensive. The 3D printer itself is a machine with a seven-figure price ...
-
NewsPICTURES: A350 subjected to extreme hot and cold
An Airbus A350-900 test aircraft has undergone two and half weeks of extreme weather tests at a laboratory in Florida.
-
News
Airbus details weight variants for A320neo family
Airbus has detailed eight weight variants for the A320neo in the first update to its airport planning documentation to feature the re-engined type.
-
NewsThree 'miracles' required for mainstream electric-powered aircraft, says P&W
Though electric aircraft technology continues to improve, an engineer at Pratt & Whitney says the technology must make revolutionary leaps before being applicable to commercial or military aircraft.