All Airframers news – Page 254
-
News
Embraer cuts first metal part for E-Jet E2
Embraer has cut the first metal component for its E-Jet E2 family of regional jets at its new factory in Evora, Portugal. The wing stub forward pressure bulkhead is for the prototype of the E190 E2, which is scheduled to fly in 2016.
-
Analysis
ANALYSIS: A330 rate cut shows challenge of bridging to A330neo
While Airbus has been overbooking its A320 line, ahead of starting its transition to the A320neo next year, it does not have the same flexibility to ease the path to A330neo production.
-
NewsA350 secures ETOPS capability up to 370min
Airbus’s A350-900 will initially be approved for extended operations up to 370min.
-
NewsFirst Qatar A350 carries out maiden flight
Qatar Airways’ first Airbus A350-900 has taken off from Toulouse, marking the maiden flight of a serial production A350 airframe.
-
NewsQatar narrows A350-900 delivery window
Qatar Airways is preparing to take delivery of the first Airbus A350-900 from 8-10 December, says chief executive Akbar Al Baker.
-
NewsPICTURE: Rolls-Royce test-flies composite blade
Rolls-Royce has flown, for the first time, the composite blades to be used in its future UltraFan and Advance engine programmes.
-
NewsFirst Qatar A350 prepares for maiden flight
Qatar Airways’ first Airbus A350 could make its maiden flight as early as today, following certification of the type at the end of September.
-
NewsSikorsky, Boeing finalise design of SB-1 Defiant
Sikorsky and Boeing have finalised the design of the team’s offering for the US Army’s joint multi-role technology demonstrator (JMR-TD), called the SB-1 Defiant.
-
NewsLockheed brings Infirno to surveillance market
Lockheed Martin has decided to enter the turreted surveillance payload market, unveiling the 15in (38.1cm)-diameter Infirno system for forward looking infrared and electro-optical imaging.
-
News
Boeing starts building parts for first 737 Max
Having delivered 8,224 737s of all variants from 1967 through September, Boeing’s workers are now starting to build the single-aisle's newest model launched in 2011 – the 737 Max.
-
NewsPICTURE: VietJet's first A320 on order enters final assembly
The first Airbus A320 aircraft included under VietJet Air’s order for up to 100 examples of the narrowbody type has entered final assembly in Tolouse.
-
NewsComac to take delivery of first C919 nose
The nose section for the first C919 prototype is expected to be delivered to Comac's final assembly centre on 15 October.
-
News
Airbus confirms intent to complete A330s in Tianjin
Airbus has confirmed tentative plans to establish an A330 completion centre in Tianjin, where the airframer already has an A320 final assembly line.
-
NewsSpring Airlines to retrofit sharklets to A320s
Low-cost carrier Spring Airlines has become the first Chinese carrier to commit to retrofitting sharklet wingtips on its fleet of Airbus A320s.
-
NewsMaiden Leap-1C flight lasted nearly 3h
CFM International has confirmed the maiden test flight of its Leap engine family, beginning with a configuration to be used exclusively by the Leap-1C on the Comac C919.
-
News
Lufthansa Technik plans new model of inspection robot
Lufthansa Technik is developing a second generation of its fuselage-inspection demonstrator robot.
-
NewsCFM starts test flights with C919's Leap-1C: source
Test flights have commenced with the CFM International Leap-1C powerplant, according to a source familiar with the effort.
-
News
FL Technics to operate hangar at Soekarno-Hatta
FL Technics has won a tender to rent and operate an aircraft maintenance hangar at Indonesia’s Soekarno-Hatta International Airport.
-
AnalysisANALYSIS: The ARJ21 progress report
Comac appears to be on the verge of finally getting its much delayed ARJ21 regional jet certificated, after having completed all the necessary ground tests and 95% of all flight test modules.
-
NewsVIDEO: Airbus 'will be ready' for 2014 Qatar A350 handover
With Airbus having achieved European certification of its 315-seat A350-900 and now making final preparations for first delivery this quarter to Qatar Airways, both major airframers will soon have a new widebody flying – giving added urgency to a market battle that has seen Boeing make the running for ...