All Engines articles – Page 4
-
NewsCF34 turbofan shortages emerge as factor affecting Embraer’s E175 production
Brazilian airframer reports delays in CF34 turbofan deliveries for its best-selling regional jet, adding to ongoing industry-wide engine supply challenges.
-
NewsPutin urges quick development of proposed PD-26 widebody engine
Russian president Vladimir Putin is urging prompt development and serial production of the proposed Aviadvigatel PD-26 engine, which has potential application to a range of large aircraft programmes. Putin spoke during an aerospace powerplant meeting on 5 September, during a visit to United Engine’s Kuznetsov facility in Samara. “This is ...
-
In depthChinese military engines ‘catching up’ to Western rivals
Indigenous Chinese turbofan engines are narrowing the performance gap with Western powerplants but still lag behind in reliability and capability, according to a senior GE Aerospace executive.
-
NewsFaury confident on 2025 delivery target despite engine shortages
Airbus is holding approximately 60 A320neo-family ‘gliders’ due to delayed engine deliveries, but CEO Guillaume Faury remains confident the airframer will achieve its 820-aircraft delivery target for 2025.
-
NewsATR hybrid-electric aircraft among programmes sharing latest Clean Aviation funding
ATR is aiming to fly a hybrid-electric regional aircraft by the end of this decade, leading two of the 12 projects newly granted Clean Aviation funding under the latest financing round for decarbonisation initiatives.
-
NewsGE Aerospace and UAW ‘far apart’ as Cincinnati strike continues
More than 600 UAW members at GE’s Evendale and Erlanger facilities have been on strike since 28 August, with negotiations stalled over healthcare costs and compensation.
-
NewsGKN expands additive production capability to US site in support of P&W programmes
GKN Aerospace is to expand its factory in Newington, Connecticut, adding a new additive fabrication capability to build parts for Pratt & Whitney PW1500G and PW1900G engines.
-
NewsNew PD-26 engine could power proposed Russian twinjet family
Russia’s deputy prime minister, Denis Manturov, has indicated that a proposed widebody twinjet family would be powered by a lower-thrust derivative of the Aviadvigatel PD-35 engine. Manturov stated in an interview with Russian news agency TASS that the engine would be designated the PD-26, in reference to its 26t (255kN) ...
-
NewsGE Aerospace workers strike after rejecting contract offer
Around 640 UAW-represented employees at GE Aerospace facilities near Cincinnati have gone on strike after rejecting the company’s latest contract proposal, which included a 12% pay increase over three years.
-
NewsBoost for UpLift flying testbed as DLR completes ground vibration tests on modified D328
Germany’s DLR aerospace research centre has completed ground vibration tests on the Deutsche Aircraft D328-based UpLift flying testbed (D-CUPL).
-
In depthBoeing and P&W seek regulatory relief and more time for 777 engine fixes
Manufacturers are developing design changes to address fan-blade failures that have damaged aircraft and caused engine fires, but need regulatory relief to complete the work.
-
AnalysisIndustry eyes greener future despite hydrogen adoption delay
Any organisation funding the research and technology activities necessary for aviation’s future faces a delicate balancing act as it looks to dole out investment.
-
NewsIAI converted 777-300ERSF demonstrates capability for Trent 1000 transport
Israel Aerospace Industries has carried out a loading trial for its converted Boeing 777-300ERSF freighter in which a Rolls-Royce Trent 1000 engine was taken on board. The engine – designed for the Boeing 787 – was taken through the freighter’s main-deck cargo door, and put into position with the Collins ...
-
NewsAir Astana completes fleet rationalisation but GTF engine fallout persists
Kazakhstan’s Air Astana Group has highlighted improvements in the Pratt & Whitney engines being delivered for its Airbus fleet, but believes remedy measures will still be needed over the course of this year and next. The carrier has achieved its simplest fleet structure for more than two decades following the ...
-
NewsRTX filed open-rotor engine patents but keeps focus on next-generation GTF
Engine manufacturer has sought several patents for open-fan designs in the past two years, even as it publicly commits to developing an updated GTF for next-generation single-aisle aircraft.
-
NewsA380 flight computers updated after ‘erroneous’ soft-thrust command on take-off
Airbus has developed a flight-computer software update for A380s after a training flight incident in which two engines received an erroneous thrust roll-back command just after take-off.
-
NewsRolls-Royce ‘on track’ with second phase of durability package for 787 and A330neo
Rolls-Royce says it remains “on track” to deliver a 30% time-on-wing improvement for the Trent 1000 and Trent 7000 engine by the end of this year. The manufacturer has been engaged in various initiatives to achieve an average 80% enhancement of time-on-wing across its modern Trent family by 2027. Rolls-Royce ...
-
NewsSafran aims to recover Leap delivery backlog to Airbus by end-October
Safran is aiming to recover the backlog of CFM International Leap-1A engine deliveries to Airbus by the end of October. The powerplant manufacturer has been affected not only by supply-chain bottlenecks but also a strike earlier this year. Airbus has been forced to park engineless aircraft – around 60, most ...
-
NewsRolls-Royce’s civil aerospace division posts strong margin improvement in first half
Rolls-Royce achieved 122 large civil engine deliveries over the first half, a figure slightly up on the previous 120. It handed over fewer Trent 1000s for the Boeing 787 and Trent 7000s for the Airbus A330neo, but more Trent XWBs for both the A350-900 and -1000 variants. Rolls-Royce’s civil aerospace ...
-
NewsSafran encouraged as recovery of Leap engine deliveries continues
Safran handed over 10% more CFM International Leap engines in the first half, a total of 729, as sequential quarterly production rates improved. The deliveries contributed to a near-17% rise in first-half propulsion revenues to €7.5 billion ($8.6 billion). Safran handed over 410 Leap engines in the second quarter, up ...