All MRO articles – Page 12
-
NewsCollins upgrades Southeast Asia support for ATR propellers
Collins Aerospace is beefing up its propeller support capabilities in Malaysia to better support the region’s ATR fleet.
-
NewsSIA Engineering extends engine support agreement with R-R
SIA Engineering has extended its engine line maintenance and in-field services agreement with Rolls-Royce for another 10 years, and expanded the range of engines covered.
-
NewsA319 pitot blockage after prolonged storage led to post-V1 take-off abort
UK investigators have found that a pitot-tube blockage generating unreliable airspeed data spurred an EasyJet Airbus A319 crew to abort take-off at high speed at London Luton. The A319 (G-EZBD) was conducting a ferry flight to Edinburgh on 13 July last year, its first operation after a month in storage. ...
-
NewsFurther A380 wing-drain fix necessary to reduce risk from fuel leaks
Airbus has developed a further modification for A380 wing spars intended to block a potential path for fuel to leak onto hot main landing-gear components. This follows an earlier discovery, during a walk-round of one aircraft, of fuel leaking from the root of the right-hand wing. Analysis found that fuel ...
-
NewsGAMECO expands Guangzhou hangar capacity
Chinese MRO company GAMECO has expanded its maintenance capacity with a third hangar at its Guangzhou base.
-
NewsHAECO completes cabin retrofit for Aeroflot 777-300ER
MRO firm HAECO has completed cabin reconfiguration work on its first Aeroflot Boeing 777-300ER.
-
NewsOperators of Leap-powered A320neos in Middle East to check for turbine blade cracks
Cracking of high-pressure turbine components in CFM International Leap-1A engines operated in the Middle East has spurred a directive to conduct enhanced checks on the parts involved. The Leap-1A is fitted to Airbus A320neo-family twinjets. According to European Union Aviation Safety Agency, occurrences of cracking to first-stage rotor blades and ...
-
NewsEtihad to divest aviation support units to Abu Dhabi holding group
Etihad Airways is to divest a number of aviation support service units including its engineering division to Abu Dhabi holding company ADQ as part of its focus on core airline operations.
-
InterviewHow Jenny Tung brings an expert’s touch to Air Canada
A deployed maintenance engineer supporting Air Canada’s corporate charter fleet, Jenny Tung is an ‘aircraft whisperer’ able to fix any fault – a skill developed from her early experience repairing cars
-
NewsTUI 737 crew faced unreliable airspeed after improvised static-port cover left in place
Investigators probing an unreliable airspeed incident on a Boeing 737-800 have traced the event to technicians’ using transparent film, instead of high-visibility stickers, to protect static ports during storage. High demand for the orange stickers, as a result of the large number of aircraft being stored, meant none was available ...
-
NewsQatar escalates A350 skin-paint row with legal filing against Airbus
Qatar Airways has filed legal proceedings against Airbus over the A350 fuselage surface paint quality issue, the latest shot in an increasingly bitter dispute between the two sides. The carrier says it has grounded 21 of its A350s, a mix of -900s and -1000s, out of a total fleet of ...
-
NewsUK urges EU-licensed personnel to apply early to ensure approval continuity
UK authorities have embarked on a campaign to prepare aviation personnel for the cessation of recognition of European Union licences and approvals at the end of next year. The campaign follows the UK’s withdrawal from European Union Aviation Safety Agency membership at the beginning of 2021, following the country’s ‘Brexit’ ...
-
AnalysisFrom The Blades to Excalibur: how 2Excel became a ‘mini-prime’
UK engineering services provider 2Excel Aviation has signed a new five-year strategic partnership with Leonardo, with the pact including joint work on a flying testbed to support the nation’s Tempest future combat air system programme.
-
NewsATR cleared to hike turboprops’ C-check maintenance interval
ATR has been granted approval to extend C-check intervals on its turboprops by 60%, increasing the figure from 5,000h to 8,000h. The regional aircraft manufacturer says the approval from the European Union Aviation Safety Agency will offer a “significant reduction” in maintenance costs to operators. This longer interval complements a ...
-
NewsKorean Air joins PW1100G MRO network
Pratt & Whitney has added Korean Air’s maintenance and engineering division into its network of MRO providers servicing the PW1100G geared turbofan.
-
NewsBAe 146 autopilot-disconnect logic modified after Saab upset
UK authorities are proposing a directive to BAe 146 operators to ensure pilots can override the autopilot during pitch input. The proposal follows an incident involving a Loganair Saab 2000 which was struck by lightning during approach to Sumburgh airport in December 2014. Although the crew made instinctive control inputs ...
-
NewsAirbus proposed 'wide range' of solutions to resolve Qatar A350 skin-paint row
Airbus insists Qatar Airways took the first legal steps in the bitter dispute over A350 skin-paint quality, and that the airframer still wants to find a solution despite responding with its own legal measures. Qatar Airways has been vocal over the deterioration of fuselage surface paint on the type, and ...
-
NewsFirst A320P2F completes maiden test flight from Singapore
The first Airbus A320 under EFW’s passenger-to-freighter conversion programme has completed its first flight from Singapore, paving the way for eventual service entry in 2022.
-
NewsAlliance Aviation touts cost savings with new A$60m Rockhampton MRO facility
Australia’s Alliance Aviation has received investment approval for the construction of an MRO facility at Rockhampton airport in Queensland state, as the airline expects longer-term cost savings in moving base maintenance works back to Australia.
-
NewsSTAECO expands Boeing 737-800 converted freighter capacity
Chinese aerospace firm Taikoo (Shandong) Aircraft Engineering Company (STAECO) will add two more Boeing 737-800 Boeing Converted Freighter (BCF) production lines to its existing conversion capacity, amid strong market demand.