MRO – Page 20
-
InterviewSriLankan Engineering ready to resume growth overseas
Despite the industry-wide upheavals caused by the coronavirus pandemic, SriLankan Engineering is hopeful of its chances to grow overseas, more than five years since its last foreign venture.
-
NewsEASA to order Airbus windshield checks after Sichuan A319 blow-out in 2018
Airbus A320-family operators are set to be instructed to carry out repetitive inspections of windshield components after a main cockpit window on a Chinese A319 blew out in cruise nearly three years ago. About 40min after taking off from Chongqing for Lhasa, the Sichuan Airlines aircraft had been flying at ...
-
NewsSIA engineering division in talks to acquire SR Technics' Malaysian arm
Singapore Airlines’ engineering division has reached a preliminary agreement to acquire the local Malaysian operation of maintenance specialist SR Technics. SIA Engineering Company says it has signed a memorandum of understanding relating to the potential acquisition “in part or whole” of SRT Malaysia. Negotiations will take place on the terms ...
-
NewsDe Havilland and PAL pitch special-mission ‘P-4’ Dash 8-400
De Havilland Canada and Canadian aircraft modification company PAL Aerospace intend to offer a special-mission variant of the Dash 8-400 turboprop to the Royal Malaysian Air Force.
-
NewsAviage Systems secures FAA certification for 787 avionics MRO
The US Federal Aviation Administration (FAA) has certificated China’s Aviage Systems for Boeing 787 avionics work, paving the way for the company to expand into the international market.
-
NewsUrgent checks ordered on Bell 505 collectives after pre-flight fracture
Operators of Bell 505 helicopters are being ordered urgently to inspect collective sticks on the type for cracks, after an incident in which the assembly fractured on an aircraft during pre-flight checks. Collective sticks are mounted to the left of each pilot’s seat and control the pitch of the helicopter’s ...
-
NewsMTU to grow narrowbody engine overhaul capacity in Berlin
German engine specialist MTU will start servicing CFM International CFM56-7Bs at its Berlin overhaul shop later this year.
-
NewsST Engineering aerospace unit sees drop in full-year profit
ST Engineering’s aerospace unit remained in the black for the full year as cost cuts and government assistance offset the full impact of the coronavirus pandemic.
-
NewsFinnair to recycle A319 in Helsinki in support of sustainability push
Finnair is to begin what it describes as the first-ever recycling of a commercial aircraft in its home country, ensuring that parts from the Airbus A319 can be reused as part of its sustainability strategy.
-
NewsSAS stays with Leap-1A for remainder of A320neo order
Scandinavian operator SAS has stayed with CFM International for a further batch of engines for its Airbus A320neo-family fleet. SAS has directly ordered 65 A320neos of which 30 have been delivered. It also operates another 15 on lease, including a single A321LR, all of them fitted with the CFM Leap-1A ...
-
NewsSkyways Technics expands Asia-Pacific facilities at Subang
Danish MRO provider Skyways Technics has completed expansion works of its Malaysia facilities, tripling its repair shop floor area and increasing its component warehouse size.
-
NewsAJW chief strikes a positive note for summer season
Company president Christopher Whiteside is hoping that the end of May will be the start of a rebound in fortunes for many airlines, and their aftermarket suppliers
-
NewsGAMECO to open up third 737-800 freighter conversion line
Chinese MRO provider GAMECO is ramping up its Boeing 737-800 passenger-to-freighter conversion capabilities, as it announces the launch of a third conversion line at its Guangzhou facility.
-
NewsATR gear door hit wing root after in-flight separation
French investigators have determined that a Hop ATR 42-500 sustained serious damage after a lost nut caused a main landing-gear door to separate during descent to Aurillac. The turboprop (F-GPYF) had departed Paris Orly on 25 March 2018, with 48 passengers and three crew members. As it descended through 18,000ft ...
-
NewsUPS receives first cockpit-updated A300, aims for fleet-wide updates by end-2022
Express air shipment company UPS has received its first Airbus A300 Freighter with Honeywell avionics updates and is now working to have its entire fleet upgraded before the end of 2022.
-
NewsHindustan Aeronautics inks contracts with GE Aviation, R-R
Hindustan Aeronautics (HAL) has signed two multi-year contracts with GE Aviation and Rolls-Royce, which will cover MRO, as well as component manufacturing, in both civil and defence aerospace.
-
NewsRobin pilots warned over carbon monoxide risk from swapped heater ducts
Operators of Robin DR400 light aircraft are being warned that a possible misfitting of ducts on the type could lead to the pilot becoming intoxicated by carbon monoxide ingestion. One in-service occurrence has emerged of the cabin-heater and carburettor-heater ducts on a DR400/120 model having been wrongly installed on the ...
-
NewsSIA Engineering ekes out small profit in third quarter
SIA Engineering (SIAEC) swung briefly back into the black in its third-quarter earnings, warning that the “glacial pace” of global air travel recovery is punishing its profitability.
-
NewsCrashed Ju 52 was poorly-maintained and not airworthy: inquiry
Swiss investigators have determined that a Junkers Ju 52 was not fit to fly, having been poorly maintained, before it spiralled into the ground after stalling during a sightseeing flight in the Alps. But the inquiry believes that – despite being “not airworthy in a physical or formal sense” – ...
-
NewsAeroTec expands maintenance work, hangar space
Aerospace services company AeroTec has opened a third maintenance hangar in Moses Lake, Washington and secured approvals to maintain several aircraft types.